Legacy:UnrealEd 2 Console

UnrealED 2.0 has a command line box at the bottom of the screen (for the latest version of UEd, see UnrealEd Console). Many of these commands are equivalent to mouse, menu or buttons of the GUI interface, but there are some which are not. Please also see UT Console for other console commands which might apply. The commands below correspond exactly to the #exec commands.

I've made a start removing emphasis from commands which have interface equivalents.

• http://www.blacksway.net/unreal/ued2/concepts/mapping_commands.htm

Notes

The commands can be entered either upper case or lower case. The list of previously used commands (in the current session) are saved in a drop down list, that can be conveniently re-selected (Click >> Enter), so commonly used commands can be quickly re-activated. Be sure that the correct object is selected before entering command. Also, tool bar buttons can be user created for any of the commands listed here. Many of these commands are seldom used, but can be handy when making large scale systemic alterations to a level (numerous repeat operations).

Commands can be bound to custom toolbar buttons or keys. See binding editor commands. See also UnrealEd interface.

Look for lines in Editor.log that start with "Cmd:" to find out about more possibly interesing console commands.

Actor commands

ACTOR ADD CLASS=<CLASS> 

add actor of class <class> (eg: CLASS=ASMD). Same as

ACTOR ALIGN 

aligns the vertices of the selected brushes to the grid. Useful for brushes who do not automatically align such as cylinders or spheres

ACTOR APPLYTRANSFORM 

applies the transform permanently to selected brushes. (what's the difference between this and BRUSH APPLYTRANSFORM?)

ACTOR CLIP Z 

In wireframe view it culls brushes that are after a certain distance. The distance being determined by where the Active brush is when it's pressed. Press again to disable. Useful for complex maps.

ACTOR DELETE 

Deletes any and all currently selected actors.

ACTOR DUPLICATE 

duplicates currently selected actor

ACTOR HIDE SELECTED 

hides the currently selected actors / brushes

ACTOR HIDE UNSELECTED 

hides any actors / brushes that are not currently selected

ACTOR KEYFRAME NUM=# 

set the current actor to key frame number # (presumably only has an effect on movers?)

ACTOR MIRROR X 

mirrors the selected actor about the X axis

ACTOR MIRROR Y 

mirrors the selected actor about the Y axis

ACTOR MIRROR Z 

mirrors the selected actor about the Z axis

ACTOR REPLACE BRUSH 

replace selected brush with the builder brush (ie. If you select an added brush and issue this command it will be replaced with another added brush that is the shape of the current builder brush, same for all other brush types) (THIS DOESNT SEEM TO WORK)

ACTOR REPLACE CLASS=<CLASS> 

replace selected actor with actor of class type <class> (eg: CLASS=ASMD). Doesn't work on brushes and movers. See Brush Hacking for this.

ACTOR RESET ALL 

resets the Location, Pivot, Rotation and Scale of the selection. See Actor Context Menu.

ACTOR RESET LOCATION 

resets the selected brush's Location See Actor Context Menu.

ACTOR RESET PIVOT 

resets the selected brush's Pivot. See Actor Context Menu.

ACTOR RESET ROTATION 

resets the selected brush's Rotation. See Actor Context Menu.

ACTOR RESET SCALE 

resets the selected brush's Scale. See Actor Context Menu.

ACTOR UNHIDE ALL 

shows all actors / brushes that may have been hidden. See Toolbox.

Actor selection commands below...

Brush Commands

BRUSH ADD 

creates an additive brush

BRUSH ADDMOVER 

creates a mover brush from red builder brush

BRUSH APPLYTRANSFORM 

Transform the selected brush permanently. Reduces stack of previous brush operations to one configuration. (Equivalent to transform permanently.)

BRUSH FROM DEINTERSECTION 

creates new brush from the deintersection operation

BRUSH FROM INTERSECTION 

creates new brush from the intersection operation

BRUSH MORE 

 ???

BRUSH SET 

 ???

BRUSH SUBTRACT 

creates a subtractive brush

BRUSHCLIP 

performs the clipping operation on the selected brush

BRUSHCLIP DELETE 

deletes the verticies used to perform brush clipping operation

BRUSHCLIP FLIP 

flips selection arrow denoting what side of brush to clip

BRUSHCLIP SPLIT 

splits the selected brush along the clipping plane

MAP BRUSH GET 

copy selected brush to red builder brush.

MAP BRUSH PUT 

move selected brush to builder brush location and take on shape of builder brush. (how does this compare to ACTOR REPLACE BRUSH?)

MAP SENDTO FIRST 

send selected brush to the beginning of the bulding process

MAP SENDTO LAST 

send selected brush to the end of the building process

PIVOT HERE 

places a pivot a the previously selected grid point

PIVOT SNAPPED 

snaps pivot to grid

Camera commands

CAMERA ALIGN 

aligns the camera on the currently selected actors/ brushes

CAMERA CLOSE FREE 

closes all free viewports or FREE can be substituded for the name of a specific viewport

CAMERA HIDESTANDARD 

hides all standard viewports

CAMERA OPEN 

opens a new floating 3D viewport. This can be maximized: very handy if all you can see in a regular viewport is software mode.

CAMERA UPDATE 

updates viewport

Class Commands

CLASS LOAD FILE=<FILENAME> 

load class from file

CLASS NEW 

create new class

CLASS SPEW ALL 

exports all scripts to your UT folder, folders are created for each class. ALL can replaced with specific class (ie BOTPACK)

SETCURRENTCLASS CLASS=<CLASS> 

set the current class to <class>

General Commands

DELETE 

deletes selected actors / brushes

DUPLICATE 

duplicates selected actors / brushes

EDIT COPY 

copies selected actors / brushes

EDIT CUT 

cuts selected actors / brushes

EDIT PASTE 

pastes selected actors / brushes

JUMPTO X,Y,Z 

Puts all viewports centered on entered coordinates. Must update view to jump to entered x y z. Used with the Game Console Command -report, which records current player location coordinates to the log file.

LEVEL LINKS 

update teleporter links

LEVEL REDRAW 

redraws the level views updating any changes

LEVEL VALIDATE 

validate the level, find errors (works only for TaoPaiPai)

LSTATS 

displays lighting stats

MAP [LOAD/SAVE/IMPORT/EXPORT] FILE=<filename> 

executes the load, save and import commands with the given filename

MAP NEW 

start new map

SHOWINV 

toggle the showing of inventory spots

TRANSACTION REDO 

redo previous action

TRANSACTION UNDO 

undo previous action

Mode Commands

Note that a number of these modes are either experimental, have been removed from the toolbox interface due to being buggy.

MODE BRUSHCLIP 

puts editor in brush clipping mode

MODE BRUSHROTATE 

puts editor in brush rotate mode

MODE BRUSHSCALE 

puts editor in brush scaling mode

MODE BRUSHSHEER 

puts editor in brush sheer mode

MODE BRUSHSNAP 

scales a brush while snapping vertices to the grid.

MODE BRUSHSTRETCH 

puts editor in brush stretching mode. Seems to be the same as brush scaling but doesn't snap to the grid.

MODE CAMERAMOVE 

puts editor in camera moving mode

MODE CAMERAZOOM 

puts editor in camera zoom mode

MODE FACEDRAG 

puts editor in face drag mode (added with UT patch 432)

MODE GRID=[1,0] 

turns snap to grid on or off (1 = On, 0 = Off)

MODE MAPEXT=[1,0] 

No idea! Somebody: Redirects Play map to Autoplay.[1,0], try MODE MAPEXT=AS-Mazon.

MODE ROTGRID=[1,0] 

turns rotational grid on or off (1 = On, 0 = Off)

MODE SHOWVERTICES=[1,0] 

turns vertices on or off (1 = On, 0 = Off) (does absolutely nothing as far as I can make out)

MODE SNAPDIST=# 

distance of vertex to grid intersection before snapping to it

MODE SNAPVERTEX=[1,0] 

turns vertex snap on or off (1 = On, 0 = Off)

MODE SPEED=# 

movement speed 1,2, or 3

MODE TEXTURELOCK=[1,0] 

turns texture lock on or off (1 = On, 0 = Off) – If texture lock is on then textures will not be reset on brushes that are vetex manipulated

MODE TEXTUREPAN 

puts editor in texture pan mode

MODE TEXTUREROTATE 

puts editor in texture rotate mode

MODE TEXTURESCALE 

puts edtor in texture scaling mode (I can't get this to do anything!)

Pathing Commands

PATHS BUILD 

auto create pathnode network - opt=1

PATHS BUILD HIGHOPT 

auto create pathnode network - opt=2

PATHS BUILD LOWOPT 

auto create pathnode network - opt=0

PATHS DEFINE 

create reachspecs

PATHS HIDE 

hide pathnodes

PATHS REMOVE 

remove all pathnodes

PATHS SHOW 

show pathnodes

PATHS UNDEFINE 

remove all reachspecs

Polygon (surface) Commands

See Selecting Surfaces.

EDCALLBACK SURFPROPS 

bring up the surface properties of selected poly

POLY DEFAULT TEXTURE=<PACKAGE.GROUP.TEXTURE> 

sets the default texture in the texture browser

POLY SELECT ADJACENT ALL 

selects all adjacent polys

POLY SELECT ADJACENT CEILINGS 

selects all adjacent ceiling polys

POLY SELECT ADJACENT COPLANARS 

selects all adjacent coplaner polys

POLY SELECT ADJACENT FLOORS 

selects all adjacent floor polys

POLY SELECT ADJACENT SLANTS 

selects all adjacent polys on the same slant

POLY SELECT ADJACENT WALLS 

selects all adjacent wall polys

POLY SELECT ALL 

selects all polys in the map

POLY SELECT MATCHING TEXTURE 

selects all matching surfaces that share the same applied texture

POLY SELECT MEMORY 

selects any polys that have been remembered in memory

POLY SELECT NONE 

deselect any currently selected poly

POLY SELECT REVERSE 

inverts the state of selected to unselected or vise versa

POLY SELECT ZONE 

selects all polys in the current zone

POLY SET TEXTURE=<PACKAGE.GROUP.TEXTURE> 

sets the poly to the given texture

POLY SETTEXTURE 

sets the poly to the current selected texture

POLY TEXALIGN FLOOR 

aligns the textures to the floor plane

POLY TEXALIGN ONETILE 

aligns textures to one tile fitting

POLY TEXALIGN WALLCOLUMN 

aligns texture to Wallcolumn

POLY TEXALIGN WALLDIR 

aligns the textures to the wall plane

POLY TEXALIGN WALLPAN 

pans out the textures on the wall plane

POLY TEXINFO 

displays information about the texture like scaling multipliers

POLY TEXMULT U=# V=# 

 ???

POLY TEXPAN U=# V=# 

pans textures along the U and V axis by the supplied number of units

POLY TEXSCALE U=# V=# UV=# VU=# 

Scales the texture by numbers entered for U and V and skews the texture for numbers entered for UV and VU script MAKE compile scripts

Rebuild Commands

BSP REBUILD [LAME/GOOD/OPTIMAL] [BALANCE=0-100] [LIGHTS] [MAPS] [REJECT] 

rebuild BSP with default settings or custom settings in brackets

LIGHT APPLY 

applies lights in your level

MAP REBUILD 

rebuild map (geometry/bsp)

Select Commands

MAP SELECT ADDS 

selects all additive brushes in the map

MAP SELECT FIRST 

select the first created brush in the level

MAP SELECT LAST 

select the last created brush in the level

MAP SELECT NONSOLIDS 

selects all nonsolid brushes in the map

MAP SELECT SEMISOLIDS 

selects all semisolid brushes in the map

MAP SELECT SUBTRACTS 

selects all subtractive brushes in the map

SELECT NONE 

Deselect any and all selected actors (it is a common error to inadvertently select an actor when moving mouse across one of the view screens).

ACTOR SELECT ALL 

selects all brushes / actors within the map

ACTOR SELECT DELETED ??? 

ACTOR SELECT INSIDE 

selects all brushes / actors within the builder brush

ACTOR SELECT INVERT 

inverts the state of selected to unselected or vise versa

ACTOR SELECT NONE 

deselect the selected actors

ACTOR SELECT OFCLASS CLASS=<CLASS> 

selects all actors of a class

ACTOR SELECT OFSUBCLASS CLASS=<CLASS> 

selects all actors of a class or subclasses. Eg use with "TournamentWeapon" to select all weapons.

Texture Commands

TEXTURE APPLYDETAIL 

Apply the "current detail texture" to the texture selected in the texture browser

TEXTURE BATCHAPPLY DETAIL=[DetailTextureName | None] [PREFIX=TextureNameMatchingPrefix] [OVERRIDE=[TRUE | FALSE] 

Search through all texture packages optionally searching for matches against the "TextureNameMatchingPrefix" for all textures found, apply DetailTextureName as the new detail texture. If a detail texture already exists and OVERRIDE=FALSE, then skip the texture

TEXTURE CLEAR 

 ??? Flashman: I think you'll find this has the same effect as the clear button on the texture properties box, basically it removes all dynamic texture sources from it, i.e. drips, fire etc..

TEXTURE CLEARDETAIL 

Clear the current detail texture.

TEXTURE CULL 

Remove Textures references on all non-visible surfaces. See Texture Cull.

TEXTURE REPLACEDETAIL 

Search through all texture packages for occurrences of detail textures that match the texture currently selected in the texture browser. If a match is found, replace the texture's detail texture with the "current detail texture.

TEXTURE SCALE DELTA=# 

 ???

TEXTURE SETDETAIL 

Set the "current detail texture" to the current the texture browser selection

Object Commands

OBJ SAVEPACKAGE PACKAGE=<packagename> FILE=<packagefile> WARN=? 

saves a given package to a specified file.

OBJ LOAD PACKAGE=<packagename> FILE=<packagefile> 

loads a given package from a specified file. See Embedding Code.

OBJ EXPORT PACKAGE=? TYPE=<exporter> NAME="objectname" FILE="filepath" 

exports an object, TYPE=OBJECT exports to T3D

OBJ RENAME OLDPACKAGE= OLDGROUP= OLDNAME= NEWPACKAGE= NEWGROUP= NEWNAME= 

rename/move object

Other Stuff – Please categorize.

NEW STANDALONE <classname> PACKAGE= FILE= CONTEXTCLASS= CONTEXT= NAME= 

 ?

NEW PUBLIC <classname> PACKAGE= FILE= CONTEXTCLASS= CONTEXT= NAME= 

 ?

NEW PRIVATE <classname> PACKAGE= FILE= CONTEXTCLASS= CONTEXT= NAME= 

 ?

NEW <factoryclass> PACKAGE=<packagename> Name=<newobjectname> [Factory-specific parameters follow] 

Used to build objects using a Factory (Editor.ClassFactoryNew, Editor.ClassFactoryUC, Editor.LevelFactory, Editor.LevelFactoryNew, Editor.ModelFactory, Editor.MusicFactory, Editor.PolysFactory, Editor.SoundFactory, Core.TextBufferFactory, Editor.TextureFactory, Editor.FontFactory, Editor.TrueTypeFontFactory, Editor.TextureFactoryNew). This is how the editor imports objects.

Examples:

   new ClassFactoryUC Package=MyLevel Name=XXX File=XXX.uc

I don't know if it actually compiles the thing.

The following might be other properties:

• ContextClass
• Context
• Package
• Name
• File

AUDIO IMPORT FILE=<filename> NAME=<name_of_sound_object> GROUP=<packagegroup> 

Imports an audio file into the package of the context in which this command is executed.

In fact, all import commands seem to rely on subclasses of "Factory".

HOOK ACTORPROPERTIES 

I think it does actor properties.

LSTAT 

LightMap stats.

MACRO ??? 

Another name for EXEC? Involves a TextBufferFactory.

TEXTURE IMPORT ALPHATRICK=? NEXT=? MTEX=? DETAIL=? TexFlags=? LODSet=? Mips=?

MODE VERTEXEDIT

MODE SELECTIONLOCK=...

MODE MAPEXT=...

MODE AFFECTREGION=...

CAMERA OPEN XR=x YR=y MISC1=? MISC2=? REN=? HWND=?

---

Mychaeel: Why are some of the commands put in italics?

Tarquin: I was making a start on marking the ones which are available as menus/toolbox buttons etc, as opposed to the ones which are unique here

Mychaeel: Hmmm... I think it'd be better if those commands' explanations simply included directions how to use them via a menu command.

who can say me how to turn off light coronas, cos i've see nothing while lamps in front of me. fanx in advance

Tarquin: probably under Advanced Options in UT

Dark Pulse: That's correct. You can also use a different renderer; I know the Software Renderer has them turned off by default. However, the Software Renderer really, really bites, so just stick with what he said. ;)

Anonymous: i couldn't find it on the polycount page or here, but what is the command for olde UEd2.0 that shows the polycount? it's showed in the log right? or maybe it's the same as the UEd3.0 command? i don't know... i'll go check that one

SabbathCat: The command is "Stat FPS", at least, in Ued 2.0 it is.

BlackHawk: The "NEW <factoryclass>..." seems to be a really powerful command. Only problem is that the exact syntax for the different factories cannot be found anywhere. Can anyone elaborate on this plz?